Innovocean Marine Offer Best Inflatable Boats for Clients

Posted by admin 27/06/2016 1 Comment(s) New Features,New Products,


1. Strongest Body

We use the German Mehler-Valmex® PVC, one of the specific PVC designed for boats. It has various featrues: UV and weather resistant and dirt repellent. Most of the PVC fabrics consist of a strong, close-weave mesh of polyester or nylon material which is sandwiched between 2 coatings. Many PVC layers are joined by glue. However, the German Mehler company uses melt-roller coating to combine these layers together. The two coatings are also thicker than other types of PVC. This material has a coated fabric with lacquered surface. When a drop of water contacts it, the contact angle between the surfaces is more than 90 degree, while other materials have the angle less than 90 degree. This feature keeps the water off the surface and protects the PVC from corruption.


2. Deepest Touch

We use computerized machine-bonding technology to connect air holding component. This is called thermal welding. There is no chemical glue using in the air holding parts.There are many advantages without using chemical glues. All chemical glues have a lifespan shorter than the PVC fabrics. They are easy to get loose and create an opening on the seam. Chemical glues are harmful to the environment, too. With the thermal welding technology, we can get rid of them.

3. Light Metal Geared

We use One Piece aluminium alloy transom. They are as light as plywood or fiberglass transoms. However, traditional wooden or plastic transoms are easy to absorb water and become corrupted. Therefore wooden or plastic transoms usually have shorter lifecycles than the boat hull. Aluminium transoms are much more durable. Because of the chemical feature of aluminum, aluminium transoms are hardly get corrupted, even in sea water. The aluminium alloy is completely recyclable so it has some environment-friendly bonus.


4. Tightly United

We apply additional materials to hold every component in place. We increase the area of contact between handles, paddle holders, transoms and the PVC.

5. 5-year Warranty

We offer 5-year limit warranty for any manufacturing problems. We also offer repair services for small boats.  


6. Canadian Company

We are a Canadian company started  from the Engineering Innovation Center of a Canadian University. We intend to design environmental-friendly pleasure crafts and to improve the technology used in the manufacturing process.

7. Standardized Manufacturer

We are incorporating with one of the largest boat manufacturer. Our manufacturer is also the largest boat supplier in Asia. Their products are widely used in commercial and rescuing. We have a series of quality-control and communication procedure to make sure that our products meet or exceed the Canadian standard.

8. Transport Canada Approved

All the boats are  built in accordance with the construction requirements of the Small Vessel Regulations(SVR), as set out in the Small Vessel Regulations and the Construction Standards for Small Vessels TP 1332..

(All the icons above are designed by Freepik and distributed by Flaticon.)


1 Comment(s)

Randall Roberts:
11/05/2017, 12:59:47 AM

Quite interested in your 12 RIB. Does it come without center console. Have you sent any ribs to BC yet and what was the shipping costs? Do you have any dealers in BC? Thx for your time Regards Randall

Leave a Comment